Paving & Driveways — Adelaide 5000
Paving & Driveways in Adelaide, SA 5000
Adelaide 5000 is 0.01 km from the Adelaide CBD and is the reference point of the 60 km service area. The ground record here is ground that moves with the seasons, so excavation, base depth and falls are set from the address rather than from a standard detail. On a city address, access, cartage and the legal point of discharge for stormwater are settled before the first cut.
What Adelaide is built on
Ground conditions at Adelaide
The recorded ground for Adelaide is ground that moves with the seasons. On a city block that means the base is built as a structure: separated from the subgrade and compacted in layers, so the paving is not asked to follow the movement underneath it. Stormwater is designed with pits and slotted channels and connected to a legal point of discharge, with ag-drains or soakage used where discharge is limited.
How it goes
The order the work happens in at Adelaide
The sequence starts before the machine arrives: what can reach the work area, where spoil can be loaded and where water will leave the site. Then the surface is built last, with excavation to design depth, road base compacted in layers, screeded bedding, pavers laid to string lines, edges cut and haunched, and joints swept in.
01
Break-out: the existing surface is broken out and removed, including old concrete or paving and any buried services found under it.
02
Excavation: the area is cut to design depth, with geofabric separation where the ground demands it.
03
Road base: quarry road base goes in and is plate-compacted in layers, the structure that carries the load.
04
Bedding: washed bedding sand is screeded flat over the compacted base.
05
Laying: pavers go down to string lines, to the agreed pattern with consistent joints.
06
Cuts and edges: edges and curves are wet-cut, then concrete haunching locks the perimeter so the field cannot spread.
07
Jointing: jointing sand is swept and compacted in, locking the surface together.
08
Complete: the surface is finished with the falls running to a pit or the recorded discharge point.
Common in Adelaide
What goes wrong on Adelaide jobs, and how it is avoided
The problems below follow the recorded ground and what a city address demands. Each one changes the scope, and each is priced as its own line rather than buried in a rate.
01
Ground that moves with the seasons: the base has to be separated and compacted so paving does not follow the movement below.
02
A legal point of discharge: stormwater is designed to the recorded discharge point rather than left to soak where it lands.
03
Tight city-address access: machine size, pallet drops and spoil loading are planned around the address.
04
Existing surfaces broken out, including old paving, concrete and buried services.
05
Falls set deliberately so water leaves the paved area rather than ponding on it.
Why AOI
One written scope for Adelaide
The Adelaide scope is written from the site rather than from the postcode: base depth, falls and the discharge point are listed before work starts, and the same team that scopes the job builds it.
On price
Quotes for Adelaide
A written quote follows the site visit. Area, base preparation, paving choice and falls drive it, and access, cartage and any stormwater connection are priced as their own lines rather than absorbed.
Questions from Adelaide
Paving & Driveways in Adelaide — FAQs
Do you do paving and driveways in the Adelaide CBD?
Yes. Adelaide 5000 is the base point of the 60 km service area, 0.01 km from the CBD, and paved work is scoped from the address in the same way as any suburban block.
The ground is recorded as ground that moves with the seasons. Does that change the base?
It does. The base is excavated to design depth, separated from the subgrade and compacted in controlled layers, so the paving is not asked to move with the soil beneath it.
Where does stormwater go on a city site?
Pits and slotted channels are designed to the legal point of discharge, with ag-drains or soakage used where discharge is limited, and the connection is set out in the written scope before work starts.
Can you work around limited access in the CBD?
Access, machine size, pallet delivery and spoil loading are planned at the site visit, because on a city address those decide the method and the time the job takes.
Paving & Driveways near Adelaide
Ready to start in Adelaide?
Book a free site visit in Adelaide. The fixed written quote follows the visit.